Skip to Content

Simple Guide on How to Remove Hot Tub Jets (Step-By-Step)

If you own a hot tub, you know how important it is to maintain it properly. One crucial part of hot tub maintenance is removing the jets for cleaning and replacement. However, removing hot tub jets can be a daunting task if you are not familiar with the process. So here’s how to remove hot tub jets:

Here are the steps to remove a hot tub’s jets:

  1. Turn Off Power: Ensure the hot tub is powered off and disconnected to avoid the pump turning on while doing the work.
  2. Access the Jets: Depending on your hot tub model, locate the access panel that covers the jets.
  3. Remove the Panel: Carefully unscrew or unclip the access panel to reveal the inner workings.
  4. Identify the Retaining Nut: Locate the retaining nut that holds the jet in place. It’s often located at the rear of the jet.
  5. Use a Jet Wrench: If needed, use a specialized jet removal wrench or pliers designed for this purpose.
  6. Loosen the Nut: Turn the retaining nut counterclockwise to loosen it. This may require some force.
  7. Gently Pull the Jet: Once the retaining nut is loose, gently pull the jet out of its housing.
  8. Inspect for Seals: Check for any rubber seals or gaskets around the jet. Replace them if damaged.
  9. Clean the Jet: Clean the removed jet thoroughly with a suitable spa cleaner or vinegar solution.
  10. Reinstall or Replace: Decide whether you want to reinstall the cleaned jet or replace it with a new one.
  11. Tighten the Nut: If reinstalling, place the jet back into the housing and tighten the retaining nut clockwise.
  12. Replace the Access Panel: Securely reattach the access panel.
  13. Power On and Test: Reconnect the power, fill the hot tub with water, and test for any leaks or issues.

In this section, we will provide you with detailed instructions on how to remove hot tub jets. Whether you’re a beginner or a seasoned pro, you’ll be able to follow our easy-to-understand guide to keep your hot tub in top condition. But before we dive into the process, let’s explore why you might need to remove the jets and the tools you’ll need for the job.

Key Takeaways:

  • Removing hot tub jets is essential for proper hot tub maintenance.
  • Our step-by-step guide makes it easy for beginners and seasoned pros to remove hot tub jets.
  • Understanding why you might need to remove the jets and having the right tools is important for a successful removal process.

Reasons for Removing Hot Tub Jets

Before we get into the nitty-gritty of hot tub jet removal, let’s take a moment to understand why you might need to do it.

One common reason is to replace a damaged or worn-out jet. Over time, hot tub jets can become corroded or clogged with debris, making them less effective. Removing and replacing these jets can improve the performance of your spa and enhance your overall experience.

Another reason you might remove hot tub jets is to customize your spa experience. By replacing some of the existing jets with different types of jets, you can create a personalized massage experience tailored to your specific needs.

DIY hot tub jet removal is also a common practice among hot tub owners who prefer to do their own maintenance rather than hiring a professional. By removing the jets yourself, you can save money on repair and replacement costs.

Hot Tub Jet Removal Tips

Whether you’re removing hot tub jets for repair or customization purposes, there are some tips and tricks that can help ensure a successful removal:

  • Refer to your hot tub’s manual for instructions specific to your model
  • Make sure the power to your hot tub is turned off before beginning the removal process
  • Use the proper tools to prevent damage to the jet or hot tub
  • Be gentle when removing the jet, as excessive force could break the jet housing or surrounding components
  • Inspect the jet and surrounding area for any signs of damage or wear and tear before replacing or re-installing

“By removing the jets yourself, you can save money on repair and replacement costs.”

By keeping these hot tub jet removal tips in mind, you can successfully remove and replace the jets in your hot tub, allowing you to enjoy a customized and effective spa experience.

Tools Needed for Hot Tub Jet Removal

Before you begin removing your hot tub jets, you’ll need to have the right tools in hand. Here’s everything you might need depending on your specific make and model:

Tool Explanation
Adjustable wrench You’ll need this to grip the jet body securely
Pliers These will help you remove the jet faceplate and internal parts
Phillips-head screwdriver This tool is essential for removing screws that secure the jet in place
Silicone lubricant You’ll need to lubricate the jet threads to make the removal process smoother
Teflon tape This will help ensure the jet threads do not leak once the jet is reinstalled


Having all of these tools on hand will help ensure a smooth and efficient hot tub jet removal process. Now that you have everything you need, let’s move on to the step-by-step guide in section 4.

Step-By-Step Guide on Removing Hot Tub Jets

Removing the jets from your hot tub is a simple process that can be completed in just a few easy steps. Here’s what you need to do:

  1. First, turn off the power to the hot tub. This ensures your safety while you work on removing the jets.
  2. Next, locate the screws that secure the front of the jet faceplate to the hot tub shell. The location of these screws may vary depending on the make and model of your hot tub, but they are usually found around the perimeter of the faceplate.
  3. Use a Phillips head screwdriver to remove the screws and the faceplate from the hot tub shell. Be sure to set the screws aside in a safe place so that you don’t lose them.
  4. You should now be able to see the back of the jet. Locate the nut that secures the jet to the hot tub shell and use a wrench to loosen and remove it. This will release the jet from the shell.
  5. If the jet is still difficult to remove, you can use a rubber mallet to gently tap it until it comes loose. Be careful not to hit the jet too hard, as this can damage the hot tub shell.
  6. Once the jet is removed, check the o-ring for any signs of wear or damage. If the o-ring needs to be replaced, do so before reinstalling the jet.
  7. To reinstall the jet, simply reverse the process. Insert the jet into the hole in the hot tub shell, secure it with the nut, replace the faceplate, and screw it back into place.
  8. Finally, turn the power back on to the hot tub and check for any leaks around the jet. If you notice any leaks, tighten the nut further until the leak stops.

Following these steps will ensure that you can safely and efficiently remove hot tub jets, keeping your spa in top condition.

Techniques for Hot Tub Jet Removal

Removing hot tub jets might be a challenging task, especially if they have been in place for a long time. In this section, we will share some additional techniques that can help you remove hot tub jets with less effort and efficiency.

Technique 1: Apply Vinegar

Vinegar is a multi-purpose solution that can help with many household tasks, including the removal of hot tub jets. If your hot tub jets are stuck, you can use vinegar to loosen them. Here are the steps:

  1. Remove the cover of the hot tub and expose the jets.
  2. Fill a container with vinegar. Be sure to use enough vinegar to fully submerge the jets.
  3. Let the jets soak in the vinegar for several hours. This can help loosen any mineral buildup that might be causing the jets to stick.
  4. After a few hours, use a wrench to try and turn the jets. If they are still stuck, repeat the process.

Technique 2: Utilize Teflon Tape

If you have removed the jets before and noticed that they were hard to turn, using Teflon tape can help make the process easier. Here are the steps:

  1. Clean the threads of the jet and the nozzle.
  2. Wrap Teflon tape around the threads of the jet. Be sure to wrap it tightly, leaving no gaps.
  3. Insert the jet and start turning it. You should feel the Teflon tape compress, which will make it easier to turn the jet.
  4. Continue turning the jet until it’s fully removed.

Technique 3: Apply Heat

Applying heat to the area around the jets can help expand the plastic, making it easier to remove them. Here are the steps:

  1. Place a hairdryer or heat gun on the highest setting.
  2. Aim the heat at the area around the jet for several minutes.
  3. Try turning the jet with a wrench. If it’s still stuck, repeat the process.

By utilizing these techniques, you can save time and hassle when removing hot tub jets. Remember to take your time and be patient throughout the process. If you encounter any challenges, don’t hesitate to seek assistance.


Removing hot tub jets may seem like a daunting task, but with our step-by-step guide and additional techniques, it can be done with ease. Regular maintenance of your hot tub is crucial for its longevity, and removing the jets is an important part of that process. By doing so, you can ensure that your hot tub stays clean and free from any debris.

We hope that our guide has given you the confidence to remove hot tub jets on your own. Remember to always use the right tools and follow each step carefully to prevent any damage to your spa. Keep your hot tub in top condition and enjoy a relaxing soak whenever you want!

Thank you for reading our guide on how to remove hot tub jets. We hope it has been helpful!


Do I need any special tools to remove hot tub jets?

Yes, you will need a few tools to remove hot tub jets. These include a screwdriver, pliers, and a wrench. Having these tools on hand will make the removal process much easier.

Can I remove hot tub jets by myself, or should I hire a professional?

You can remove hot tub jets yourself, even if you’re a beginner. Our step-by-step guide will walk you through the process and provide detailed instructions. However, if you’re unsure or uncomfortable, it’s always a good idea to consult a professional.

Are there any risks involved in removing hot tub jets?

When done correctly, removing hot tub jets is a safe process. However, it’s important to turn off all power to the hot tub and follow our instructions carefully to minimize any risks. If you’re unsure or uncomfortable, it’s best to seek professional assistance.

Why would I need to remove hot tub jets?

There are several reasons you might need to remove hot tub jets. Some common reasons include cleaning or replacing damaged jets, troubleshooting water flow issues, or upgrading to newer, more efficient jets. Removing the jets allows for easier access to perform these tasks.

How often should I remove and clean my hot tub jets?

The frequency of jet removal and cleaning depends on several factors, such as how frequently you use your hot tub and the water quality. As a general guideline, it’s recommended to clean hot tub jets every 3-4 months to prevent buildup and ensure optimal performance.